Chicago™ Grip Bell-System Type Grip
1692-5AT
- For 0.218'' to 0.550'' (5.54 to 13.97 mm) diameter cable range with a maximum safe load of 8000 lbs (3629 kg)
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Outside diameter of support wire includes thickness of the polyethylene coating
- For support wires 0.134 and larger, refer to the 1659 series
- Made in the USA
Videos
Images
High-Res JPG
1684-5at_photo.jpg
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago-style grip was designed for cable sizes from 0.12'' to 1.0'' (3.10 mm to 25.4 mm). Equipped with chain, toggle and shackle. For support wire 0.134'' and larger, please refer to the 1659 series Outside diameter of support wire includes thickness of polyethylene coating.
Specifications
Type:
Chicago Grip
Cable Type:
Steel Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.6 lb (2.99 kg)
UPC:
092644471858
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
