1684-74
Chicago™ Grip for EHS Cable, Curved Jaw
- When pulling the EHS (extra-high-strength) galvanised-steel cable, the galvanised surface has a tendency to coat the jaws of any grip, causing the cable to slip
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double 'V' contour
- For use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand.
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Made in the USA
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago-style grip was designed for cable sizes from 0.12'' to 1.0'' (3.10 mm to 25.4 mm). When pulling EHS (extra-high-strength) galvanised-steel cable, the galvanising has a tendency to coat the jaws of any grip, causing the cable to slip. Double 'V' contour reduces the possibility of slippage and damage to the cable.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Double V
Tooth Type:
Milled/Curved
Jaw Length (inches):
5
Jaw Length (cm):
12.7
Maximum Safe Load (lb):
8000
Maximum Safe Load (kg):
3628.7
Weight (lb):
5.6
Weight (kg):
2.5
UPC:
092644471728
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
