Screwdriver Set, 1000V Insulated, 6-Piece

85076INS

  • Insulated Screwdriver Set includes 1/4'' Slotted and No. 2 Phillips in 4'' round shanks, plus No. 2 Square, No. 1, No. 2 Phillips and 3/16'' Slotted tips in 6'' round shanks
  • 1000V rated screwdrivers feature a layer of bright orange impact and flame resistant insulation to protect from electrical shock
  • Made in the USA
  • Tether hole for added safety when working at height
  • Cushion-Grip™ handles for greater torque and comfort
  • Tip-Ident™ quickly identifies the screwdriver tip orientation, so you can easily engage the screwdriver tip with the screw
  • Meets or exceeds ASTM F1505-16(2021) and IEC 60900:2018
1000volt Product Icon
wf_tip-phillips Product Icon
wf_tip-square Product Icon
wf_tip-slotted Product Icon
Videos
Downloads
Images
High-Res JPG 85076ins_photo.jpg

This 6-Piece Insulated Screwdriver Set is Made in the USA and features assorted Klein Tools Slotted, Phillips and Square tip screwdrivers. Each screwdriver is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock.

Specifications
Application:
For Work Near Energised Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Included:
(6) Screwdrivers: 4'' (10 cm) Shanks in 1/4'' (0.6 cm) Slotted and No. 2 Phillips Tips; 6'' (15 cm) Shanks in 3/16'' (0.5 cm) Slotted, No. 1/No. 2 Phillips and No. 2 Square Tips
Magnetic:
No
Insulated:
Yes
Shank Length:
4'' (10.2 cm); 6'' (15.2 cm)
Material:
Steel, Plastic
Handle Material:
Steel
Handle Colour:
Black
Handle Length:
4.31'' (10.9 cm)
Handle Diameter:
1.24'' (3.2 cm)
Colour Code:
Orange
Overall Length:
8.32'' (21.1 cm); 10.32'' (26.2 cm)
Overall Height:
8.32'' (21.1 cm); 10.32'' (26.2 cm)
Overall Width:
1.24'' (3.2 cm)
Number of Pieces:
6
Type:
Insulated Screwdriver Set
Standard:
ASTM F1505-16(2021)
Weight:
1.6 lb (0.7 kg)
UPC:
092644851117
Additional Information
Feature Icon klein/wp_made-usa-en.jpg
Warnings
  • Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
  • Whenever possible, always switch off lines and equipment prior to working on or around them.
  • Always inspect your tools before use.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
  • Keep tool clean, dry and free from any surface contaminants.