Wire-Pulling Foam Lubricant
51100
- No mess formula stays where it is applied and wipes clean from hands and fabric
- 4x greater yield than gel or wax lubricants
- Coats better and is 30% more slippery than gel or wax lubricants
- One can equals four quarts of wax/gel lubricant. Based on job-site pulls with foam in 3/4'' conduit when used as directed.
- Made in the USA
Klein Tools' Foam Wire Pulling Lubricant is a no-mess, no-hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It is also easily cleaned off hands, clothing and carpeting.
Specifications
Type:
Foam
Application:
Wire pulling
Special Features:
Coats better and 30% more slippery than gel or wax lubricants
Size:
19 oz (0.6 L)
Container:
Aerosol Can
Working Temperature:
40°F to 100°F (4°C to 38°C)
Weight:
1.2 lb (0.5 kg)
UPC:
092644511004
Warnings
- DANGER: Extremely flammable.
- Keep out of reach of children.
- Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F. Do not transport or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature.
- Do not use wet product on live circuits. Compound is electrically conductive before it dries.
- For industrial and commercial use only.
