646316INS
3/16'' Insulated Nut Driver - 152 mm Hollow Shaft
- Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools and clearly marked with the official 1,000-volt rating symbol
- Two layers of insulation provide protection against electric shock
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
- Hollow shafts make it possible to work on stacked circuit boards or other long-bolt applications
- Made in the USA
- Tip-Ident quickly identifies nut driver size
- Cushion-Grip™ handles for greater torque and comfort
Get those hard-to-reach nuts and bolts with Klein's full hollow-shaft nut driver for long-bolt applications. Its two layers of insulation protect against electric shock, and it is individually tested to exceed standards. The bright-orange outer coating is flame and impact resistant. Its high-dielectric white inner coating is bonded to the tool for extra toughness.
Specifications
Application:
Stacked Circuit Boards, Long-Bolt Applications
Special Features:
Tip-Ident quickly identifies nut driver size
Measurement Standard:
SAE
Nut Driver Sizes:
3/16''
Magnetic:
No
Shaft Length:
6'' (15.2 cm)
Material:
Steel
Insulated:
Yes
Handle Material:
High-dielectric plastic
Colour Code:
Black
Overall Length:
9.75'' (24.8 cm)
Standard:
IEC 60900 and ASTM F1505
Type:
Hollow
Weight:
2.4 oz (68 g)
UPC:
092644652257
Additional Information
Warnings
- Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
- Because moisture, films or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free from any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
