Chicago™ Grip - Bell-System Type L Grip
1684-5AT
- Identical to Bell-System type 'L' strand puller
- For a cable diameter range of 0.218'' to 0.550'' (5.54 to 13.97 mm); maximum safe load of 8000 lbs (3629 kg)
- Outside diameter of support wire includes thickness of the polyethylene coating.
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Made in the USA
- For support wires 0.134 and larger, refer to the 1659 series
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. Identical to the Bell-System Type L Strand Puller. Equipped with chain, toggle and shackle. For support wire 0.134'' and larger, please refer to the 1659 series Outside diameter of support wire includes thickness of polyethylene coating.
Specifications
Type:
Chicago Grip
Application:
Wire pulling
Special Features:
L Strand Puller – Equipped with a Chain, Toggle and Shackle
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.9 lb (3.12 kg)
UPC:
092644471636
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
