KT4501
Parallel Jaw Grip 4501 Series with Hot Latch
- Versatile grip hold a wider range of ACSR cable sizes, reducing the number of grips needed
- Round jaw holds 0.18'' to 0.60'' (4.57mm to 15.20 mm) diameter cable range
- A large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- Hot latch closes automatically to guard against the grip accidentally disengaging from the wire
- Made in the USA
- Locking handle keeps jaw open while the grip is placed on cable with a hot stick
- Max. Safe Load of 5000 lbs (2268 kg)
Klein Tools has been manufacturing high-quality grips for more than 135 years. Klein Parallel-Jawed Grips are lightweight and compact. They can pull an exceptionally wide range of cable types and sizes.
Specifications
Type:
Parallel-jaw Grip
Application:
Wire Pulling
Special Features:
Hot latch, spring, locking handle
Overall Length (inches):
11
Overall Length (cm):
27.9
Overall Height (inches):
5.5
Overall Height (cm):
14
Overall Width (inches):
1.9
Overall Width (cm):
4.8
Material:
Steel
Cable Type:
ACSR, AAC, Copper
Cable Diameter:
0.18'' to 0.6'' (4.57 to 15.2 mm)
Hot Latch:
Yes
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Round
Tooth Type:
Coarse
Jaw Length (inches):
4
Jaw Length (cm):
10.2
Maximum Safe Load (lb):
5000
Maximum Safe Load (kg):
2268
Weight (lb):
3.8
Weight (kg):
1.7
UPC:
092644477515
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
