1649920
Wide Range Transmission Grip with Hot Latch
- Cable pulling grip securely pulls ACSR, AAC and bare copper cables
- Holds cable sizes from 0.68'' to 1.42'' (17.3 mm to 36.1 mm)
- Includes a latch to help maintain cable position in the grip jaw
- Fine-tooth jaw geometry provides greater grip strength
- Made in the USA
- Innovative hot latch with V-notch centres cable
- Spring closes grip on cable to hold the initial position
- Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- Max. Safe Load of 12000 lbs (5443 kg)
- Patent pending design
The Klein Tools Wide Range Transmission Grip with Hot Latch was specifically designed to securely pull ACSR, AAC and bare copper cables. Holds a wide range of cables from 0.68'' to 1.42'' (17.3 to 36.1 mm) This grip has a maximum safe load of 12,000 lbs.
Specifications
Type:
Parallel-Jaw Grip
Application:
Wire Pulling
Special Features:
Hot Latch, One-Handed Grip
Overall Length (inches):
13.1
Overall Length (cm):
33.3
Overall Height (inches):
9.3
Overall Height (cm):
23.6
Overall Width (inches):
3.06
Overall Width (cm):
7.8
Material:
Steel
Cable Type:
ACSR, AAC, Copper
Cable Diameter:
0.68'' to 1.42'' (17.3 to 36.1 mm)
Hot Latch:
Yes
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Round
Tooth Type:
Fine
Jaw Length (inches):
4.85
Jaw Length (cm):
12.3
Maximum Safe Load (lb):
12000
Maximum Safe Load (kg):
5443.1
Weight (lb):
8.3
Weight (kg):
3.8
UPC:
092644470776
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on or near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
