KT4802
Parallel Jaw Grip 4802 Series with Hot Latch
- Securely pulls 0.700'' to 1.25'' (17.78 mm to 31/75 mm) diameter ACSR cables
- Round jaws provide maximum contact with the cable, minimising deformation
- Hot latch closes automatically to guard against grip accidentally disengaging from the wire
- Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks
- Made in the USA
- Maximum safe load of 12,000 lbs (5443 kg)
- Klein offers a lifetime guarantee on material defects and workmanship for the normal life of the product.
The Klein KT4802 Forged Parallel-Jaw Grips with Hot-Latch's large round eyelet opening in the handle are perfect for accommodating a wide variety of hooks on hoists, winches and tackle blocks. The hot latch closes automatically to guard against the grip accidentally disengaging from the wire. The KT4802 has a jaw length of 5-1/8”.
Specifications
Type:
Parallel-jaw Grip
Application:
Wire Pulling
Special Features:
Hot Latch
Overall Length (inches):
13.4
Overall Length (cm):
34
Overall Height (inches):
7.6
Overall Height (cm):
19.3
Overall Width (inches):
2.5
Overall Width (cm):
6.4
Material:
Steel
Cable Type:
ACSR, AAC, Copper
Cable Diameter:
0.7'' to 1.25'' (17.78 to 31.75 mm)
Hot Latch:
Yes
Swing Latch:
No
Spring:
Yes
Locking Handle:
No
Jaw Type:
Round
Tooth Type:
Coarse
Jaw Length (inches):
5.125
Jaw Length (cm):
13
Maximum Safe Load (lb):
12000
Maximum Safe Load (kg):
5443.1
Weight (lb):
9
Weight (kg):
4.1
UPC:
092644477584
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
