Grip for High-Strength Cable
1684-5F
- Designed for cables in sizes from 0.16'' (4.06 mm) to 0.55'' (13.97 mm)
- Double 'V' grooves give four-point contact, reducing the chance of slipping and providing proper alignment of the wire and cable
- For larger conductors, see our grips with round inside-jaw contours
- Locking handle keeps jaw open while the grip is placed on cable with a hot stick
- Made in the USA
- Similar to Cat. No. 1684-5 except with a file inserted in jaw for extra gripping power. Replacement file No. 578 and screws No. 573 are also available
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago style-grip was designed for cable sizes from 0.16'' to 0.55'' (4.06 mm - 13.97 mm). Double 'V' grooves give four-point contact, reducing the chance of slipping and providing proper alignment of the wire and cable.
Specifications
Type:
Chicago Grip
Application:
Wire pulling
Special Features:
Removeable file (replacement file Cat. No. 578 and screws Cat. No. 573)
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.16'' to 0.55'' (4.06 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Single V with File Insert
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.4 lb (2.9 kg)
UPC:
092644479465
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
