1647724
Wide Range Distribution Grip, EHS Wire
- EHS Jaw holds a wide range of cables from 0.162'' to 0.883'' (4.11 to 22.42 mm)
- 50% lighter than the KT4500 grip
- One-handed design makes for easier actuation
- Alternating sawtooth jaw geometry provides greater grip strength
- Made in the USA
- Spring closes grip on cable to hold the initial position
- Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- Max. Safe Load of 5000 lbs (2268 kg)
- Patent pending design
Klein Tools' Wide Range Distribution Grip with EHS Jaw holds a wide range of cables from 0.162'' to 0.883'' (4.11 to 22.42 mm). This versatile, one-handed actuation grip is 50% lighter than the Klein's KT4500 grip. Made in the USA, this grip has a maximum safe load of 5000 lbs (2268 kg).
Specifications
Type:
Parallel-Jaw Grip
Application:
Wire Pulling
Special Features:
One-Handed Grip
Overall Length (inches):
10.25
Overall Length (cm):
26
Overall Height (inches):
8
Overall Height (cm):
20.3
Overall Width (inches):
1.75
Overall Width (cm):
4.4
Material:
Steel
Cable Type:
EHS Cable
Cable Diameter:
0.162 to 0.883'' (4.1 to 22.4 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
No
Jaw Type:
Round
Tooth Type:
Coarse
Jaw Length (inches):
3.31
Jaw Length (cm):
8.4
Maximum Safe Load (lb):
5000
Maximum Safe Load (kg):
2268
Weight (lb):
2.9
Weight (kg):
1.3
UPC:
092644470745
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on or near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
